Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterRoller Replacement in Marietta, GA
Roller replacement in Marietta typically costs between $85 and $160 for a full set, depending on the door’s height and whether you’re swapping in nylon or steel rollers. We replace worn garage door rollers same-day and we quote the exact price before the first tool leaves the truck. If your door has started grinding, squealing, or shimmying its way up the tracks, the rollers are usually the culprit, though Track Realignment may also be needed.
This page covers what roller replacement involves, when it’s actually necessary, and what Marietta homeowners should expect to pay. If you’d rather skip the reading and just get a number, call us at (912) 575-7540 and we’ll walk you through it in two minutes.
Roller replacement is part of our broader Garage Door Repair service, and we’ve been doing it in Cobb County since 2002. Jaylen Ross leads our Marietta team, and every tech who rolls up to your driveway is background-checked and in uniform. You’ll know exactly who’s knocking before they knock.
Key Takeaways
- Roller replacement in Marietta runs $85 – $160 for a full set of rollers, with nylon rollers on the higher end.
- Worn rollers sound like grinding, squealing, or rattling and make the door jerk as it moves.
- We replace all rollers at once, not one at a time, because partial replacement just moves the wear to the new parts.
- Every roller replacement is covered by our 365-Day Done Right Promise, in writing.
- Call (912) 575-7540 for a free estimate with no four-hour waiting window.
When You Need Roller Replacement
Garage door rollers are the small wheels that ride inside the vertical and horizontal tracks, guiding the door up and down, and proper Sensor Calibration ensures they stop safely at each end. Most doors have between 10 and 12 of them. When they wear out, the door doesn’t glide anymore; it fights the tracks. Here’s what Marietta homeowners usually notice first:
- A grinding or metal-on-metal sound: This often means the bearings inside the roller have failed, and the wheel is dragging along the track rather than spinning. In East Cobb, we see this a lot on doors that face south and get direct afternoon heat every day.
- A door that jerks or shudders while moving: If one roller is worn flat or cracked, the door catches on that corner for a split second on every cycle. It looks like a stutter.
- Squealing or chirping that WD-40 doesn’t fix: Lubricating a worn roller is like putting lipstick on a popped tire. The noise comes back within days.
- Visible wear on the roller itself: If you look at your rollers and see flat spots, cracks in the nylon, or rust on steel rollers, they’re done.
- The door sits unevenly in the tracks: When rollers on one side wear faster, the door lists slightly. Left alone, this can bend the track itself and turn a $150 roller job into a $400 track repair.
One thing to be clear about: if your door is also slow to open or feels unusually heavy, the problem might not be the rollers. It could be the torsion spring, the horizontal coil above your door that does the actual lifting-something our Spring Repair service addresses directly. Our techs check the whole system on every visit, not just the part you called about.
Our Roller Replacement Process
Here’s exactly what happens when you book roller replacement with Marlow Garage Door Repair Marietta.
- Book online or call. You can book on our website in under a minute without a single phone call, or if you’d rather talk to a person, a live human answers 24/7. No voicemail tree.
- Track your tech in real time. The relay visibility guarantee means you get a live arrival time you can follow on your phone, the same way you’d track a rideshare. You’ll also see a photo and name of your technician before they arrive.
- We inspect all 10 to 12 rollers and the track alignment. We measure for flat spots, cracked nylon, rust, and worn bearings. We also check that the tracks are plumb and parallel, because new rollers on bent tracks won’t last.
- You get a written price before work starts. The number we quote is the number on the invoice. If we find something else while we’re in there, we stop and show you before doing anything. No surprise line items.
- We swap every roller, test the door through a full cycle, and lubricate the tracks. We replace all rollers, not just the obviously worn ones. Then we run the door up and down several times and hand you a digital invoice you can pay from a link.
Every step of this is backed by the 365-Day Done Right Promise. If the repair isn’t right, we come back and make it right, free, for a full year. In writing, not a verbal promise.
Roller Replacement Pricing in Marietta
We give a straight answer on pricing because we know that’s what you actually want. Here’s what roller replacement costs in Marietta:
| Item | Price Range | Notes |
|---|---|---|
| Steel rollers (full set) | $85 – $110 | Standard for most doors. Durable but slightly louder than nylon. |
| Nylon rollers (full set) | $110 – $160 | Quieter, smoother, and last longer. Recommended for attached garages. |
| One-off roller replacement | $25 – $40 | Not recommended. We explain why below. |
What moves the price within those ranges? Door height is the big one. A standard seven-foot door takes 10 rollers; an eight-foot door takes 12. Nylon rollers with sealed bearings cost more than steel, but they’re quieter and hold up better in Marietta’s humidity, which can cause steel rollers to rust faster than they would in a drier climate.
We recommend replacing the full set even if only one roller has visibly failed. Rollers wear at roughly the same rate, so replacing one today usually means replacing another next month, and another the month after. You’d pay multiple service fees for what we can handle in one trip for the price of the parts and one labor charge.
And to be transparent: this is not the job to DIY. Rollers on the bottom brackets are under constant cable tension, and trying to pop them out without releasing that tension can send the cable flying. We’ve been called in to fix a lot of well-intentioned weekend projects. Let a trained professional handle this one.
Call (912) 575-7540 for an exact quote. Estimates are free, and we’ll give you the number before anything gets touched.
Garage Door Roller Types We Install
We work on all major garage door brands in Marietta, including Chamberlain, Genie, Clopay, and Amarr. Your tech knows the door before they arrive, because our team is trained on eight leading brands and we stock the roller sizes that fit each one. The tech shows up with what your door needs, not with a “we’ll have to order that” line.
On most homes, we install nylon rollers with sealed bearings. They’re quieter, they don’t rust, and they reduce the overall wear on your tracks, hinges, and opener motor. If you have an attached garage and a bedroom above it, the noise difference between steel and nylon is significant. You’ll notice it the first time you open the door after the swap.
FAQs – Roller Replacement
How much does roller replacement cost in Marietta?
Roller replacement in Marietta typically costs between $85 and $160 for a full set, with steel rollers on the lower end and nylon rollers on the higher end. The exact price depends on door height and roller type, and we lock in your price with a written quote before any work starts. Call (912) 575-7540 for an exact quote, free of charge.
Can you replace my garage door rollers the same day?
Yes. Roller replacement is a 45 to 90 minute job, and we stock replacement rollers for every major brand, including Clopay and Amarr. Call us today and we can usually have the job done before dinner. Live phone support is available 24/7 if you want to talk to a real person right now.
Is it better to replace rollers or the whole garage door?
If your door itself is in good shape (no cracked panels, no rot, no significant rust), replacing the rollers is the right call and costs a fraction of a new door. However, if your door is 15 or more years old and showing damage on multiple panels, the math may favor replacement. We’ll give you an honest recommendation either way, and we won’t sell you a new door if your old one has years left.
How long do garage door rollers last?
Steel rollers typically last 5 to 7 years in Marietta’s climate, and nylon rollers with sealed bearings can last 12 to 15 years or longer. The lifespan also depends on how often you cycle the door. If you park in the garage and use it four times a day, your rollers get about 1,400 cycles per year. If you store your door opener on the visor and come and go constantly, it’s more.
Can you replace just one garage door roller?
We can, but we don’t recommend it. Rollers wear at similar rates, so replacing one today usually means another fails next month. You’d end up paying a service fee each time when one trip would have solved it. We’ll quote you the full-set price and let you decide.
If you’re hearing the grind, squeak, or stutter that comes with worn rollers, call (912) 575-7540 or book online. We’ll get a tech to your Marietta home same-day, with a written price in hand before any work begins.
Written by Jaylen Ross, Owner at Marlow Garage Door Repair Marietta, serving Marietta.