Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterCable Repair in Marietta, GA
Garage door cable repair in Marietta typically runs $150 – $325, and most jobs are finished the same day. Cables are under constant tension – when one snaps, the door can slam down or jam crooked in the track. If you’re hearing a loud bang from the garage or your door is hanging unevenly, call Garage Door Repair in Marietta at (912) 575-7540 before opening or closing it again.
At Marlow Garage Door Repair Marietta, we replace broken cables on every major brand, including Chamberlain, Genie, and Clopay doors. Every cable job gets a written price before we touch a wrench, and every repair is backed by our 365-Day Done Right Promise. That means if the cable work fails within a year, we come back and fix it – free. No fine print, no argument.
A snapped cable is not a DIY fix. The torsion spring above your door holds hundreds of pounds of torque, and cables route that force. When a cable breaks, the spring is still loaded – and working near it without the right tools and training is genuinely dangerous. We’ll walk you through what’s wrong, what it costs, and what we’ll do before any work starts.
When You Need Cable Repair
Marietta homeowners call us for cable issues in a few predictable situations. Here’s what cable trouble actually looks like:
- Your door slams down instead of lowering smoothly. A broken cable removes the controlled descent, so the door drops hard. In neighborhoods like Whitlock Heights and Indian Hills, we see this most often on older wooden doors with worn roller tracks.
- The door hangs crooked or tilted in the opening. One cable snapped, the other is still holding – which twists the door and grinds the track. Do not run the opener.
- You heard a loud snap or bang from the garage. That’s the sound of cable strands letting go. It sounds like a firecracker. After that, the door often won’t lift at all.
- Visible fraying on the cables themselves. Look at the two cables running vertically along each side of the door. If you see split strands, rust, or kinking, the cable is failing and will snap soon – usually at the worst possible time.
- The door opens a few inches then stops or reverses. Frayed cables can bind in the pulley, tripping the opener’s safety sensor. This gets worse fast.
Marietta’s humidity and summer heat accelerate cable wear. The galvanized steel cables on your door corrode faster in our climate than they would in a dry one, especially in garages that aren’t climate-controlled. We routinely replace cables on doors in East Cobb and Sandy Plains that are only 5 – 7 years old simply because of moisture exposure.
Our Cable Repair Process
How we fix your garage door cables
- Book online or call (912) 575-7540. You get a live person around the clock – no voicemail, no callback queue. Tell us your door brand (Chamberlain, Genie, Clopay, Amarr – we’re trained on all of them) and what the door is doing.
- Watch your tech en route. You’ll see a live arrival time on your phone through The Relay Visibility Guarantee. Background-checked, uniformed technicians arrive with the right cable and hardware for your specific door model.
- Get a written price before any work begins. We inspect both cables, the pulleys, the torsion spring, and the track. Then you get the exact dollar amount locked in. The number on your invoice matches the number you approved. Always.
- We replace both cables, not just the broken one. When one cable snaps, the other has the same amount of wear. Replacing only one means a second service call in a few months. We also inspect and replace any scored pulleys that caused the failure.
- We balance the door and test everything. After cable replacement, we manually open and close the door, check the spring tension, and run the opener to confirm smooth operation. You get before-and-after photos.
- Pay from a link, covered for a full year. Your digital invoice arrives by text. You pay from the link. And the repair is covered by our 365-Day Done Right Promise – if anything’s wrong within a year, we’re back at no charge.
Cable Repair Pricing in Marietta
Cable repair in Marietta generally runs between $150 and $325, depending on what actually failed. Here’s a breakdown of what drives the price:
| Repair Type | Typical Cost Range | What’s Included |
|---|---|---|
| Single cable replacement | $150 – $210 | One cable, labor, on-site adjustment |
| Dual cable replacement (recommended) | $180 – $275 | Both cables, labor, full balance check |
| Cable + pulley replacement | $225 – $325 | Cables, new pulleys, track alignment |
| Cable + spring replacement | $300 – $475 | Full reset of the lifting system |
What changes the price? The door’s weight and size (a double-car Clopay door takes longer than a single-car Genie), whether the pulleys are scored and need replacing, and whether the torsion spring also needs attention. If the cable snapped because a rusted pulley cut through it, replacing the cable alone doesn’t solve the problem – the new cable will fail the same way.
You’ll always see your exact price in writing before we start. No surprise line items. No “while we’re here” upsells. Estimates are free – call (912) 575-7540 and we’ll tell you over the phone what you’re likely looking at before we even arrive.
FAQs – Cable Repair
How much does garage door cable repair cost in Marietta?
Cable repair in Marietta typically costs $150 – $325 depending on whether you need one cable or both, and whether pulleys or springs also need replacing. You’ll get a written price before any work starts. Call (912) 575-7540 for a free estimate based on your specific door.
Can you fix a broken garage door cable the same day?
Yes, in most cases we can repair your cable the same day you call. We carry cable stock and hardware for Chamberlain, Genie, Clopay, and Amarr doors on every truck, so the technician who arrives has what’s needed for your particular setup. Call (912) 575-7540 and we’ll give you a live arrival window you can track.
Is it cheaper to repair a cable or replace the whole door?
Repair is almost always cheaper. Even a dual cable replacement with new pulleys rarely exceeds $325, while a new garage door in Marietta starts around $900 – $1,400 installed. Replace when the door itself is failing (significant rot, structural bends, or a blown-out section) – not because of a cable.
Why did my garage door cable snap?
Cables snap from age, rust, or a pulley that’s seized and cutting into the strands. In Marietta, humidity is a real factor – we see rusted cables in unconditioned garages constantly. When one cable fails, the other side carries the full load and fails soon after, which is why we always recommend replacing both at once.
Call Marlow Garage Door Repair Marietta
If your garage door cable snapped or you’re seeing fraying, call us now at (912) 575-7540. You’ll talk to a real person. You’ll get a written price before any work happens. And your repair is covered for a full year. We serve all of Marietta – from the Historic District up to East Cobb, over to Powder Springs Street, and out toward Sandy Plains. Book online in seconds or call us day or night.
Written by Jaylen Ross, Owner at Marlow Garage Door Repair Marietta, serving Marietta.