Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Installation Cost in Marietta?
Garage door installation in Marietta, GA typically runs between $700 and $2,200 for a standard single or double door, including basic labor and disposal of your old door. Mid-range steel doors with insulation land around $1,200 to $1,800 installed. The final number depends on door size, material, insulation rating, and whether you’re replacing an existing door or starting from scratch.
We’ll walk you through exactly what drives that price in Marietta, where local factors like humidity and code requirements come into play, and how to avoid paying for upgrades you don’t need. No vague estimates, no surprise line items, just the numbers as they stand in 2026.
Garage Door Installation Cost Breakdown (2026)
Here’s what you should expect to pay in the Marietta market this year, broken down by component and service. These ranges reflect what we see on real jobs across Cobb County, from Powers Ferry to East Cobb to the historic neighborhoods near the Square.
| Item | Typical Marietta Price Range |
|---|---|
| Single-car door (8×7 or 9×7) | $700 – $1,200 |
| Double-car door (16×7) | $900 – $2,200 |
| Insulated steel door (mid-range) | $1,000 – $1,800 |
| High-R-value insulated door | $1,500 – $2,200 |
| Basic labor (installation only) | $200 – $500 |
| Old door removal and disposal | $75 – $150 |
| New track and hardware | $150 – $300 |
| Garage door opener (new install) | $250 – $550 |
What moves the needle most: door size and material. A basic non-insulated single steel door is the cheapest option, but in Marietta’s summer humidity, you’ll feel the heat radiating through it in July. Most Marietta homeowners go with a mid-range insulated steel door for the energy savings and noise reduction, especially if the garage shares a wall with a bedroom or living space.
Custom wood doors, carriage-house styles, and full-view glass doors push past the $2,200 mark quickly, sometimes reaching $4,000 or more. Those are specialty products, and you should expect longer lead times on top of the higher price.
What Affects Garage Door Installation Pricing in Marietta
Here are the specific factors that change your quote in Marietta, not generic advice you’d find on any website.
- Door size and configuration. A 16×7 double door costs more than an 8×7 single, but the jump isn’t linear. Double doors require wider tracks, heavier springs, and a more powerful opener. If your opening is non-standard, like an 8×8 or a custom height found in older Marietta homes near the Square, expect to pay 10-20% more.
- Insulation and R-value. In Marietta’s climate, insulation matters. Uninsulated doors get brutally hot in August and cold enough to freeze whatever you store along the wall in January. Polystyrene-insulated doors (R-6 to R-9) add $150 to $400 over base models. Polyurethane (R-12 to R-18) adds $300 to $700 but pays off in comfort and opener strain reduction.
- Old door removal and disposal. If you’re replacing an existing door, the old one has to come out. That’s $75 to $150 for labor and haul-away. Some companies bury this fee; we list it as a separate line item so you know exactly what you’re paying for.
- Opener compatibility and replacement. If your existing opener is more than eight years old or was installed before 2018, it may not have the safety features required for new doors. You could be looking at an additional $250 to $550 for a new opener on top of the door itself.
- Track and hardware condition. New doors usually need new track, and in Marietta’s humid summers, rust is a real concern. If your current track is rusted or misaligned, factor in $150 to $300 for replacement track and hardware.
- Permit requirements in Marietta. Some Marietta neighborhoods, particularly those covered by historic district guidelines near the Square, may require design review before you install a new door. Cobb County generally doesn’t require a permit for direct door replacement, but if you’re changing the opening size or adding a new opening, you may need one. Check with Marietta’s Building Services Department before scheduling.
How to Save on Garage Door Installation
Smart ways to keep your Marietta garage door installation cost down without cutting corners:
- Replace the door and opener at the same time. If your opener is nearing end of life, bundling saves on labor. One visit, one installation charge, and often a better price on the opener itself.
- Choose a standard size. If your opening accepts a standard 8×7 or 16×7, stay with it. Custom sizes mean custom manufacturing and a bigger bill.
- Skip the fancy windows if budget matters. Decorative glass inserts add $200 to $600 depending on configuration. They look nice, but they also reduce insulation value and add a future repair point.
- Ask about seasonal pricing. Some manufacturers run spring and fall promotions. Off-peak scheduling, typically mid-winter when demand drops, can sometimes land a better labor rate.
- Get a written estimate first. Every Marlow install starts with a written price before work begins. You’ll see the full line-item breakdown, so you can decide what’s worth paying for and what’s not. Call (912) 575-7540 for a free estimate.
One thing not to cheap out on: the spring. A door’s torsion spring, that’s the horizontal coil above the door that does most of the lifting, should be rated for the exact weight of your new door. Undersized springs wear out faster and fail sooner, which lands you a separate spring repair bill of $180 to $340 down the road. Our technicians check spring rating on every install.
Garage Door Installation Process: What to Expect
Here’s how a typical installation goes in Marietta, step by step, so you know what’s happening at every stage.
- Measure and quote. We measure your existing door, check the opening for square, inspect the track and hardware, and assess your existing opener. You’ll get a written price covering everything: door, labor, removal, disposal, and any hardware that needs replacing. That price is locked before any work starts.
- Schedule with live tracking. You book online or by phone, pick a day that works, and then watch your technician’s arrival window live. No four-hour guessing game. The Relay Visibility Guarantee means you see exactly when we’ll arrive, and you’ll know who’s coming because techs are background-checked and uniformed.
- Old door removal. We disconnect the existing door, remove the old opener bracket if you’re replacing it, and carefully bring the old door down. For older wooden doors, this can be the most physically demanding part of the job. We handle all of it, including haul-away.
- Track and hardware installation. New track goes up, and the torsion spring assembly gets installed with the correct rating for your new door’s weight. Springs use a steel coil under high tension, a real injury risk if mishandled, which is exactly why trained pros do this work and why we never recommend DIY spring work.
- Door panel installation. Panels are stacked, aligned, and secured. Hinges, rollers, and cable assemblies go on. We check that the door opens and closes smoothly across the full travel path.
- Opener integration or installation. If you have an existing opener that’s compatible, we’ll connect it to the new door and adjust settings so the door travels evenly. If you need a new opener, installation runs $250 to $550 for the unit and labor.
- Balance and safety test. We test the door’s balance, verify the auto-reverse safety sensor, and run a full open-close cycle checking for binding, scraping, or noise. Any issue gets fixed before we hand over the door.
- Final walkthrough and invoice. We show you the finished work, explain the warranty, and leave you with a digital invoice you can pay from your phone. Your 365-Day Done Right Promise is in writing: if anything isn’t right within a full year, we come back and make it right for free.
Garage Door Installation vs. Repair: Which Do You Need?
In Marietta, a lot of homeowners call us assuming they need a full replacement when a repair would solve the problem for a fraction of the cost. Here’s how the numbers shake out.
If your door has a broken torsion spring, the fix is $180 to $340. A snapped cable runs $130 to $250. A misaligned track is $120 to $240. Those repairs restore function without touching the door itself. If the door is less than 10 years old and the panels are in decent shape, repair usually wins.
But if your door has dented or rusted panels, is over 15 years old, or lacks insulation and you can feel the heat radiating off it in August, installation starts to make sense. Replacing all panels individually at $250 to $500 per panel adds up fast, and older doors often have discontinued panel styles that are no longer manufactured. At that point, a new door at $700 to $2,200 delivered with a fresh warranty becomes the better financial call.
Not sure where your door falls? Call (912) 575-7540 and we’ll talk through what you’re seeing. If it’s repairable, we’ll tell you. If it’s not worth repairing, we’ll show you the numbers for a replacement and let you decide.
DIY Garage Door Installation: The Risks No One Talks About
We get it. The YouTube videos make it look doable. But garage door installation is not a weekend project, and here’s why.
The torsion spring, the core component that lifts your door, holds enormous tension. If it suddenly releases, a snapped spring can send metal shrapnel flying with enough force to cause severe injury. Even professional technicians approach torsion springs with respect and specific tools. This is not a part of the job to learn on the fly. We handle spring installation and adjustment on every install for a reason: it’s the single most dangerous part of garage door work.
Beyond the safety issue, there’s the alignment problem. A garage door that’s even slightly out of square will bind, scrape, and wear components prematurely. That’s a $1,200 door ruined by a $0 mistake. Professional installation costs $200 to $500 in labor, and that buys you alignment, balance testing, and the warranty support that comes with it.
If you’re in Marietta and considering the DIY route, we’d say this: the risk on the spring alone isn’t worth the hundred dollars you’d save on labor. Have a pro do it, and have it done right the first time.
FAQs – Garage Door Installation Cost
How much does a new garage door cost in Marietta in 2026?
A new garage door in Marietta costs $700 to $2,200 installed for standard sizes. Single-car doors start around $700, double-car doors start around $900, and mid-range insulated doors typically run $1,200 to $1,800. The range reflects material, insulation, and size choices. Call (912) 575-7540 for an exact quote, free.
Is it cheaper to repair or replace a garage door?
Repair is almost always cheaper upfront: $120 to $340 for common fixes like springs, cables, or track realignment versus $700 to $2,200 for a full replacement. But if your door is older than 15 years, has multiple damaged panels, or lacks insulation in Marietta’s summer heat, replacement may cost less over the long run. We’ll give you both numbers and let you decide.
How long does garage door installation take?
A standard garage door installation in Marietta takes 3 to 6 hours from arrival to final walkthrough. Single doors run closer to 3 hours, double doors with opener replacement run closer to 6. We schedule full-day blocks to handle any surprises, but most jobs are done by early afternoon.
Do I need a permit to install a garage door in Marietta?
For a direct door replacement, generally no. For changing the opening size or adding a new opening, Cobb County and the City of Marietta may require a permit, and costs vary by project scope. We’ll tell you if your project needs one, and we handle the paperwork when it does.
Can you install a garage door the same day?
Yes, we offer same-day and next-day installation in Marietta for standard-sized doors in stock. Custom doors take 2 to 4 weeks for manufacturing. Call (912) 575-7540 and we’ll check inventory for your door size right now.
What’s included in your garage door installation price?
Every Marietta install includes the door, track, hardware, torsion spring rated for your door’s weight, labor, old door removal, and disposal. The written price you approve before work starts is the price you pay, no exceptions. That’s the Marlow way.
Why Marietta Homeowners Choose Marlow for Garage Door Installation
Jaylen Ross has been leading garage door work in Marietta since 2002. The team at Marlow Garage Door Repair Marietta runs on a simple rule: show the homeowner the written price before a wrench turns. That’s not a slogan, it’s how every job in this market works, whether we’re installing a new garage door in Marietta or replacing a snapped spring.
We’re trained on eight major brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That means the tech pulling into your driveway already knows your door’s quirks before it’s open. No fumbling through a manual, no guesswork on compatibility.
And every installation, repair, or service call is covered by the 365-Day Done Right Promise. If something isn’t right within a full year, we return and fix it free. That’s a written guarantee, not a verbal assurance.
When you schedule, you’ll also get The Relay Visibility Guarantee: a live arrival time you can track from your phone, a background-checked uniformed technician whose name you see before arrival, before-and-after photos of the work, a written price, and a digital invoice you pay with a link. No four-hour windows, no phone tag, no surprises. Just a straightforward garage door installation at a fair Marietta price.
Ready to get your quote? Call (912) 575-7540 and a live person answers, 24/7, no voicemail. Or book online in under a minute and see your technician on the way before they arrive.
Written by Jaylen Ross, Owner at Marlow Garage Door Repair Marietta, serving Marietta since 2002.
Pricing reflects the Marietta market as of 2026. Marlow Garage Door Repair Marietta offers free estimates – call (912) 575-7540.
What Our Customers Say
"The spring replacement came with a clear photo of the old broken one. I liked the simple texting throughout."
- Brian W."I could see the tech's name and ETA in the text. Showed up right when the tracker said. Cable repair done in under an hour."
- Omar B."Door was off track. Booked from my phone at lunch and it was fixed that afternoon. Total matched the quote I accepted in the app."
- Katie R.